release/lang/English.lng

[Tera Term]
DLG_SYSTEM_FONT=System,14,0
DLG_TAHOMA_FONT=Tahoma,8,0

MENU_FILE=&File
MENU_FILE_NEW=&New connection...\tAlt+N
MENU_FILE_DUPLICATE=D&uplicate session\tAlt+D
MENU_FILE_GYGWIN=Cy&gwin connection\tAlt+G
MENU_FILE_LOG=&Log...
MENU_FILE_COMMENTLOG=C&omment to Log...
MENU_FILE_VIEWLOG=&View Log
MENU_FILE_SHOWLOGDIALOG=Sho&w Log dialog...
MENU_FILE_SENDFILE=&Send file...
MENU_FILE_CHANGEDIR=&Change directory...
MENU_FILE_REPLAYLOG=&Replay Log...
MENU_FILE_LOGMETT=Log&MeTT
MENU_FILE_PRINT=&Print...\tAlt+P
MENU_FILE_DISCONNECT=&Disconnect\tAlt+I
MENU_FILE_EXIT=E&xit\tAlt+Q

MENU_TRANS=&Transfer
MENU_TRANS_KERMIT_RCV=&Receive
MENU_TRANS_KERMIT_GET=&Get...
MENU_TRANS_KERMIT_SEND=&Send...
MENU_TRANS_KERMIT_FINISH=&Finish
MENU_TRANS_X_RCV=&Receive...
MENU_TRANS_X_SEND=&Send...
MENU_TRANS_Z_RCV=&Receive
MENU_TRANS_Z_SEND=&Send...
MENU_TRANS_BP_RCV=&Receive
MENU_TRANS_BP_SEND=&Send...
MENU_TRANS_QV_RCV=&Receive
MENU_TRANS_QV_SEND=&Send...

MENU_EDIT=&Edit
MENU_EDIT_COPY=&Copy\tAlt+C
MENU_EDIT_COPYTABLE=Copy &table
MENU_EDIT_PASTE=&Paste\tAlt+V
MENU_EDIT_PASTECR=Paste<C&R>\tAlt+R
MENU_EDIT_CLSCREEN=Clear &screen
MENU_EDIT_CLBUFFER=Clear &buffer
MENU_EDIT_CANCELSELECT=Cancel se&lection
MENU_EDIT_SELECTSCREEN=S&elect screen
MENU_EDIT_SELECTALL=Select &all

MENU_SETUP=&Setup
MENU_SETUP_TERMINAL=&Terminal...
MENU_SETUP_WINDOW=&Window...
MENU_SETUP_FONT=&Font...
MENU_SETUP_KEYBOARD=&Keyboard...
MENU_SETUP_SERIALPORT=S&erial port...
MENU_SETUP_TCPIP=T&CP/IP...
MENU_SETUP_GENERAL=&General...
MENU_SETUP_ADDITION=A&dditional settings...
MENU_SETUP_SAVE=&Save setup...
MENU_SETUP_RESTORE=&Restore setup...
MENU_SETUP_LOADKEYMAP=&Load key map...

MENU_CONTROL=C&ontrol
MENU_CONTROL_RESET=&Reset terminal
MENU_CONTROL_AREYOUTHERE=Are you &there\tAlt+T
MENU_CONTROL_SENDBREAK=&Send break\tAlt+B
MENU_CONTROL_RESETPORT=Reset &port
MENU_CONTROL_BROADCAST=&Broadcast command
MENU_CONTROL_OPENTEK=&Open TEK
MENU_CONTROL_CLOSETEK=&Close TEK
MENU_CONTROL_MACRO=&Macro

MENU_WINDOW=&Window
MENU_WINDOW_WINDOW=&Window

MENU_HELP=&Help
MENU_HELP_INDEX=&Index
MENU_HELP_ABOUT=&About Tera Term...

MENU_SHOW_MENUBAR=Show menu &bar


TEKMENU_FILE=&File
TEKMENU_FILE_PRINT=&Print...\tAlt+P
TEKMENU_FILE_EXIT=E&xit\tAlt+Q

TEKMENU_EDIT=&Edit
TEKMENU_EDIT_COPY=&Copy\tAlt+C
TEKMENU_EDIT_COPYSCREEN=Copy &screen
TEKMENU_EDIT_PASTE=&Paste\tAlt+V
TEKMENU_EDIT_PASTECR=Paste<C&R>\tAlt+R
TEKMENU_EDIT_CLSCREEN=C&lear screen

TEKMENU_SETUP=&Setup
TEKMENU_SETUP_WINDOW=&Window
TEKMENU_SETUP_FONT=&Font

TEKMENU_VTWIN=VT-Wind&ow

TEKMENU_WINDOW=&Window

TEKMENU_HELP=&Help
TEKMENU_HELP_INDEX=&Index
TEKMENU_HELP_USING=Using &help
TEKMENU_HELP_ABOUT=&About Tera Term...

TEKMENU_SHOW_MENUBAR=Show menu &bar


; ttermpro
; filesys.cpp
MSG_COMMENT_LOG_OPEN_ERROR=It is not opened by the log file yet.

; ttime.c
MSG_USE_IME_ERROR=Can't use IME

; ttplug.c
MSG_LOAD_EXT_ERROR=Cannot load extension %s (%d)

; ttwinman.c
DLG_MAIN_TITLE_CONNECTING=[connecting...]
DLG_MAIN_TITLE_DISCONNECTED=[disconnected]

; vtwin.cpp
MSG_DISCONNECT_CONF=Disconnect?
MSG_DANDD_CONF=Are you sure that you want to send the file content?
MSG_DANDD_CONF_TITLE=Tera Term: File Drag and Drop
MSG_EXEC_TT_ERROR=Can't execute TeraTerm. (%d)
MSG_FIND_CYGTERM_DIR_ERROR=Can't find Cygwin directory.
MSG_EXEC_CYGTERM_ERROR=Can't execute Cygterm.
MSG_EXEC_TTMENU_ERROR=Can't execute TeraTerm Menu. (%d)
MSG_EXEC_LOGMETT_ERROR=Can't execute LogMeTT. (%d)
MSG_VIEW_LOGFILE_ERROR=Can't view logging file. (%d)
FILEDLG_OPEN_LOGFILE_TITLE=Select replay log file with binary mode
FILEDLG_OPEN_LOGFILE_FILTER=all(*.*)\0*.*\0\0
DIRDLG_CYGTERM_DIR_TITLE=Select Cygwin directory
MSG_CYGTERM_CONF_WRITEFILE_ERROR=Can't write CygTerm configuration file (%d).
MSG_CYGTERM_CONF_REMOVEFILE_ERROR=Can't remove old CygTerm configuration file (%d).
MSG_CYGTERM_CONF_RENAMEFILE_ERROR=Can't rename CygTerm configuration file (%d).
FILEDLG_SELECT_LOGVIEW_APP_TITLE=Choose a executing file with launching logging file
FILEDLG_SELECT_LOGVIEW_APP_FILTER=exe(*.exe)\0*.exe\0all(*.*)\0*.*\0\0
FILEDLG_SELECT_LOGDIR_TITLE=Select log folder
MSG_LOGFILE_INVALID_CHAR_ERROR=Invalid character is included in log file name.
MSG_LOGFILE_TOOLONG_ERROR=The log file name is too long.
MSG_SAVESETUP_PERMISSION_ERROR=Teraterm.ini file doesn't have the writable permission.

DLG_TABSHEET_TITLE=Tera Term: Additional settings
DLG_TABSHEET_TITLE_GENERAL=General
DLG_TABSHEET_TITLE_COPYPASTE=Copy and Paste
DLG_TABSHEET_TITLE_VISUAL=Visual
DLG_TABSHEET_TITLE_LOG=Log
DLG_TABSHEET_TITLE_CYGWIN=Cygwin

DLG_TAB_GENERAL_CLICKURL=&EnableClickableURL
DLG_TAB_GENERAL_DEMILITER=Del&imiter Characters
DLG_TAB_GENERAL_DISABLESENDBREAK=DisableAccelerator&SendBreak
DLG_TAB_GENERAL_ACCEPTBROADCAST=Accept&Broadcast
DLG_TAB_GENERAL_MOUSEWHEEL_SCROLL_LINE=Mouse&WheelScrollLine
DLG_TAB_GENERAL_AUTOSCROLL_ONLY_IN_BOTTOM_LINE=&AutoScrollOnlyInBottomLine

DLG_TAB_COPYPASTE_CONTINUE=EnableContinued&LineCopy
DLG_TAB_COPYPASTE_MOUSEPASTE=&DisableMouseRButtonPaste
DLG_TAB_COPYPASTE_CONFIRMPASTE=&ConfirmMouseRButtonPaste
DLG_TAB_COPYPASTE_SELECTLBUTTON=Select&OnlyByLButton
DLG_TAB_COPYPASTE_CONFIRM_CHANGE_PASTE=ConfirmChange&Paste

DLG_TAB_VISUAL_ALHPA=&AlphaBlend
DLG_TAB_VISUAL_ETERM=&Eterm lookfeel
DLG_TAB_VISUAL_MOUSE=&MouseCursor
DLG_TAB_VISUAL_RED=&Red
DLG_TAB_VISUAL_GREEN=&Green
DLG_TAB_VISUAL_BLUE=&Blue

DLG_TAB_LOG_EDITOR=View Log &Editor
DLG_TAB_LOG_FILENAME=Default Log &File Name(strftime format)
DLG_TAB_LOG_FILEPATH=Default Log &Save Folder
DLG_TAB_LOG_AUTOSTART=&Auto start logging

DLG_TAB_CYGWIN_PATH=Cygwin Install &Path

DLG_COMMENT_TITLE=Comment to Log

DLG_BROADCAST_TITLE=Tera Term: Broadcast command
DLG_BROADCAST_HISTORY=History
DLG_BROADCAST_PARENTONLY=Send to this process only
DLG_BROADCAST_ENTER=Enter key
DLG_BROADCAST_SUBMIT=Submit
DLG_BROADCAT_REALTIME=Realtime mode

DLG_PRNABORT_PRINTING=Printing

DLG_PROT_FIELNAME=Filename:
DLG_PROT_PROTO=Protocol:
DLG_PROT_PACKET=Packet#:
DLG_PROT_TRANS=Bytes transfered:

DLG_FILETRANS_FILENAME=Filename:
DLG_FILETRANS_FULLPATH=Fullpath:
DLG_FILETRANS_TRNAS=Bytes transfered:
DLG_FILETRANS_START=&Start
DLG_FILETRANS_PAUSE=Pau&se

; commonlib.c
MSG_WINSOCK_ERROR=Cannot use winsock
MSG_INVALID_HOST_ERROR=Invalid host
MSG_CANTOEPN_ERROR=Cannot open %s
MSG_CANTOEPN_FILE_ERROR=Cannot open file
MSG_COMM_REFUSE_ERROR=Connection refused
MSG_COMM_REACH_ERROR=Network cannot be reached
MSG_COMM_TIMEOUT_ERROR=Connection timed out
MSG_COMM_CONNECT_ERROR=Cannot connect the host
MSG_CREATE_THREAD_ERROR=Can't create thread

; ttpdlg
; ttdlg.c
DLG_ABOUT_TITLE=About Tera Term

DLG_DIR_TITLE=Tera Term: Change directory
DLG_DIR_CURRENT=Current dir:
DLG_DIR_NEW=&New dir:
DLG_SELECT_DIR_TITLE=Select new directory

DLG_FONT_TITLE=Tera Term: Font setup
DLG_FONT_FONT=&Font:
DLG_FONT_SIZE=&Size:
DLG_FONT_BOLD=Enable &bold style
DLG_FONT_CHARSET=Font &char set:
DLG_FONT_SAMPLE=Sample

DLG_GEN_TITLE=Tera Term: General setup
DLG_GEN_PORT=Default &port:
DLG_GEN_LANG=&Language:

DLG_HOST_TITLE=Tera Term: New connection
DLG_HOST_TCPIPHOST=H&ost:
DLG_HOST_TCPIPPORT=TCP &port#:
DLG_HOST_TCPIPPROTOCOL=Protoco&l:
DLG_HOST_SERIAL=&Serial
DLG_HOST_SERIALPORT=Po&rt:

DLG_KEYB_TITLE=Tera Term: Keyboard setup
DLG_KEYB_TRANSMIT=Transmit DEL by:
DLG_KEYB_BS=&Backspace key
DLG_KEYB_DEL=&Delete key
DLG_KEYB_KEYB=&Keyboard:
DLG_KEYB_META=&Meta key
DLG_KEYB_DISABLE=Disabled mode:
DLG_KEYB_APPKEY=&Application Keypad
DLG_KEYB_APPCUR=Application &Cursor

DLG_SERIAL_TITLE=Tera Term: Serial port setup
DLG_SERIAL_PORT=&Port:
DLG_SERIAL_BAUD=&Baud rate:
DLG_SERIAL_DATA=&Data:
DLG_SERIAL_PARITY=P&arity:
DLG_SERIAL_STOP=&Stop:
DLG_SERIAL_FLOW=&Flow control:
DLG_SERIAL_DELAY=Transmit delay
DLG_SERIAL_DELAYCHAR=msec/&char
DLG_SERIAL_DELAYLINE=msec/&line

DLG_TCPIP_TITLE=Tera Term: TCP/IP setup
DLG_TCPIP_HOSTLIST=Host &list
DLG_TCPIP_ADD=&Add
DLG_TCPIP_UP=&Up
DLG_TCPIP_REMOVE=&Remove
DLG_TCPIP_DOWN=&Down
DLG_TCPIP_HISTORY=H&istory
DLG_TCPIP_KEEPALIVE=&Keep alive on Telnet
DLG_TCPIP_KEEPALIVE_SEC=Sec
DLG_TCPIP_AUTOCLOSE=Auto &window close
DLG_TCPIP_PORT=&Port#:
DLG_TCPIP_TELNET=T&elnet
DLG_TCPIP_TERMTYPE=&Term type:

DLG_TERM_TITLE=Tera Term: Terminal setup
DLG_TERM_WIDTHLABEL=&Terminal size
DLG_TERM_ISWIN=Term &size = win size
DLG_TERM_RESIZE=Auto &window resize
DLG_TERM_NEWLINE=New-line
DLG_TERM_CRRCV=&Receive:
DLG_TERM_CRSEND=Trans&mit:
DLG_TERM_ID=Terminal &ID:
DLG_TERM_LOCALECHO=&Local echo
DLG_TERM_ANSBACK=&Answerback:
DLG_TERM_AUTOSWITCH=A&uto switch (VT<->TEK)
DLG_TERM_KANJI=&Kanji (receive)
DLG_TERM_KANA=&7bit katakana
DLG_TERM_KANJISEND=Kan&ji (transmit)
DLG_TERM_KANASEND=7&bit katakana
DLG_TERM_KIN=Kanji-i&n:
DLG_TERM_KOUT=Kanji-&out:
DLG_TERM_LOCALE=locale:
DLG_TERM_CODEPAGE=CodePage:
DLG_TERM_RUSSCHARSET=Character set
DLG_TERM_RUSSHOST=H&ost:
DLG_TERM_RUSSCLIENT=&Client:

DLG_WIN_TITLE=Tera Term: Window setup
DLG_WIN_TITLELABEL=&Title:
DLG_WIN_CURSOR=Cursor shape
DLG_WIN_BLOCK=B&lock
DLG_WIN_VERT=&Vertical line
DLG_WIN_HORZ=H&orizontal line
DLG_WIN_HIDETITLE=H&ide title bar
DLG_WIN_HIDEMENU=Hide &menu bar
DLG_WIN_COLOREMU=&Color emulation
DLG_WIN_PCBOLD16=&16 Colors (PC style)
DLG_WIN_AIXTERM16=1&6 Colors (aixterm style)
DLG_WIN_XTERM256=&256 Colors (xterm style)
DLG_WIN_SCROLL1=&Scroll buffer:
DLG_WIN_SCROLL3=li&nes
DLG_WIN_COLOR=Color
DLG_WIN_TEXT=Te&xt
DLG_WIN_BG=Bac&kground
DLG_WIN_ATTRIB=&Attribute
DLG_WIN_REVERSE=R&everse
DLG_WIN_R=&R:
DLG_WIN_G=&G:
DLG_WIN_B=&B:
DLG_WIN_ALWAYSBG=Always &use Normal text's BG
DLG_WIN_NORMAL=Normal
DLG_WIN_BOLD=Bold
DLG_WIN_BLINK=Blink

DLG_WINLIST_TITLE=Tera Term: Window list
DLG_WINLIST_LABEL=&Window:
DLG_WINLIST_OPEN=&Open
DLG_WINLSIT_CLOSEWIN=&Close window

MSG_FIND_DIR_ERROR=Cannot find directory

; ttpfile
; ttfile.c
DLG_FOPT=Option
DLG_FOPT_BINARY=&Binary
DLG_FOPT_APPEND=&Append
DLG_FOPT_PLAIN=&Plain text
DLG_FOPT_TIMESTAMP=&Timestamp
DLG_FOPT_HIDEDIALOG=Hide &dialog

DLG_XOPT=Option
DLG_XOPT_CHECKSUM=Check&sum
DLG_XOPT_CRC=&CRC
DLG_XOPT_1K=1&K
DLG_XOPT_BINARY=&Binary

FILEDLG_KEYBOARD_FILTER=keyboard setup files (*.cnf)\0*.cnf\0\0
FILEDLG_SETUP_FILTER=setup files (*.ini)\0*.ini\0\0
FILEDLG_SAVE_SETUP_TITLE=Tera Term: Save setup
FILEDLG_RESTORE_SETUP_TITLE=Tera Term: Restore setup
FILEDLG_LOAD_KEYMAP_TITLE=Tera Term: Load key map
FILEDLG_ALL_FILTER=All(*.*)\0*.*\0\0
FILEDLG_USER_FILTER_NAME=User define

DLG_GETFN_TITLE=Tera Term: Kermit Get
DLG_GETFN_FILENAME=&Filename:

; ttftypes.h
FILEDLG_TRANS_TITLE_LOG=Log
FILEDLG_TRANS_TITLE_SENDFILE=Send file
FILEDLG_TRANS_TITLE_KMTRCV=Kermit Receive
FILEDLG_TRANS_TITLE_KMTGET=Kermit Get
FILEDLG_TRANS_TITLE_KMTSEND=Kermit Send
FILEDLG_TRANS_TITLE_KMTFIN=Kermit Finish
FILEDLG_TRANS_TITLE_XRCV=XMODEM Receive
FILEDLG_TRANS_TITLE_XSEND=XMODEM Send
FILEDLG_TRANS_TITLE_ZRCV=ZMODEM Receive
FILEDLG_TRANS_TITLE_ZSEND=ZMODEM Send
FILEDLG_TRANS_TITLE_BPRCV=B-Plus Receive
FILEDLG_TRANS_TITLE_BPSEND=B-Plus Send
FILEDLG_TRANS_TITLE_QVRCV=Quick-VAN Receive
FILEDLG_TRANS_TITLE_QVSEND=Quick-VAN Send

; dlg clipboard
DLG_CLIPBOARD_TITLE=Tera Term: Clipboard confirmation
DLG_CLIPBOARD_INFO=Currently, Clipboard has been locked.

; ttptek
; tttek.c
MSG_TEK_PRINT_ERROR=Printer dose not support graphics

; ttpmacro
FILEDLG_OPEN_MACRO_TITLE=MACRO: Open macro
FILEDLG_OPEN_MACRO_FILTER=Macro files (*.ttl)\0*.ttl\0\0

BTN_PAUSE=Pau&se
BTN_START=&Start
BTN_END=&End
BTN_YES=&Yes
BTN_NO=&No
BTN_STOP=&Stop macro
BTN_CONTINUE=&Continue

; common
MSG_ERROR=ERROR
MSG_TT_ERROR=Tera Term: Error

BTN_OK=OK
BTN_CANCEL=Cancel
BTN_CLOSE=Close
BTN_HELP=&Help

; help
HELPFILE=teraterm.chm
MSG_OPENHELP_ERROR=Can't open HTML help file(%s).


[TTSSH]
; font
DLG_TAHOMA_FONT=Tahoma,8,0
DLG_SYSTEM_FONT=System,14,0

; menu
MENU_ABOUT=About &TTSSH...
MENU_SSH=SS&H...
MENU_SSH_AUTH=SSH &Authentication...
MENU_SSH_FORWARD=SSH F&orwarding...
MENU_SSH_KEYGEN=SSH KeyGe&nerator...

; dlg about
DLG_ABOUT_TITLE=About TTSSH
DLG_ABOUT_SERVERID="Server ID: "
DLG_ABOUT_PROTOCOL="Using protocol: "
DLG_ABOUT_ENCRYPTION="Encryption: "
DLG_ABOUT_SERVERKEY="Server keys: "
DLG_ABOUT_AUTH="Authentication: "
DLG_ABOUT_COMP="Compression: "
DLG_ABOUT_CLIENTID="Client ID: "
DLG_ABOUT_HOSTKEY="Host Key: "
DLG_ABOUT_TOSERVER=" to server, "
DLG_ABOUT_FROMSERVER=" from server"
DLG_ABOUT_ENCRYPTION="Encryption: "
DLG_ABOUT_COMPDELAY="Delayed Compression: "
DLG_ABOUT_CIPHER_INFO=%s to server, %s from server
DLG_ABOUT_KEY_INFO=%d-bit server key, %d-bit host key
DLG_ABOUT_KEY_NONE=None
DLG_ABOUT_COMP_INFO=level %d; ratio %.1f (%ld:%ld)
DLG_ABOUT_COMP_INFO2=level %d
DLG_ABOUT_COMP_NONE=none
DLG_ABOUT_COMP_UPDOWN=Upstream %s; Downstream %s
DLG_ABOUT_AUTH_INFO=User '%s', using %s

; dlg auth
DLG_AUTH_TITLE=SSH Authentication
DLG_AUTH_TITLE_FAILED=Retrying SSH Authentication
DLG_AUTH_BANNER=Logging in to %s
DLG_AUTH_BANNER2=Authentication required.
DLG_AUTH_BANNER2_FAILED=Authentication failed. Please retry.
DLG_AUTH_USERNAME=User &name:
DLG_AUTH_PASSWORD=&Passphrase:
DLG_AUTH_REMEMBER_PASSWORD=Remember password on &memory
DLG_AUTH_METHOD_PASSWORD=Use p&lain password to log in
DLG_AUTH_METHOD_RSA=Use &RSA/DSA key to log in
DLG_AUTH_METHOD_RHOST=Use r&hosts to log in (SSH1)
DLG_AUTH_METHOD_CHALLENGE1=Use challenge/response to log in(&TIS)
DLG_AUTH_METHOD_CHALLENGE2=Use &challenge/response to log in(keyboard-interactive)
DLG_AUTH_PRIVATEKEY=Private &key file:
DLG_AUTH_LOCALUSER=Local &user name:
DLG_AUTH_HOST_PRIVATEKEY=Host private key &file:
MSG_PAGEANT_NOTFOUND=Can't find Pageant.
MSG_PAGEANT_NOKEY=Pageant has no valid key.

; dlg auth setup
DLG_AUTHSETUP_TITLE=TTSSH: Authentication Setup
DLG_AUTHSETUP_BANNER=Select defaults for authentication:
DLG_AUTHSETUP_USERNAME=User &name:
DLG_AUTHSETUP_METHOD_PASSWORD=Use p&lain password to log in
DLG_AUTHSETUP_METHOD_RSA=Use &RSA/DSA key to log in
DLG_AUTHSETUP_METHOD_RHOST=Use r&hosts to log in (SSH1)
DLG_AUTHSETUP_METHOD_CHALLENGE=Use challenge/response to log in (SSH1:&TIS, SSH2:keyboard-interactive)
DLG_AUTHSETUP_PRIVATEKEY=Private &key file:
DLG_AUTHSETUP_LOCALUSER=Local &user name:
DLG_AUTHSETUP_HOST_PRIVATEKEY=Host private key &file:
DLG_AUTHSETUP_CHECKAUTH=&Check the enabled authentication methods before login (SSH2)

FILEDLG_OPEN_PRIVATEKEY_TITLE=Choose a file with the RSA/DSA private key
FILEDLG_OPEN_PRIVATEKEY_FILTER=identity files\0identity;id_rsa;id_dsa\0identity(RSA1)\0identity\0id_rsa(SSH2)\0id_rsa\0id_dsa(SSH2)\0id_dsa\0all(*.*)\0*.*\0\0
MSG_KEYSPECIFY_ERROR=You must specify a file containing the RSA/DSA private key.
MSG_READKEY_ERROR=read error SSH2 private key file\n%s
MSG_RHOSTS_NOTDEFAULT_ERROR=Rhosts authentication will probably fail because it was not the default authentication method.\nTo use Rhosts authentication in TTSSH, you need to set it to be the default by restarting\nTTSSH and selecting "SSH Authentication..." from the Setup menubefore connecting.
MSG_NOAUTHMETHOD_ERROR=Server does not support any of the authentication options\nprovided by TTSSH. This connection will now close.

; dlg diff host
DLG_DIFFERENTHOST_TITLE=SECURITY WARNING
DLG_DIFFERENTHOST_WARNING=Your known hosts list has an entry for the server "####################################", but the machine you have contacted has presented a DIFFERENT KEY to the one in your known hosts list. A hostile machine may be pretending to be the server.
DLG_DIFFERENTHOST_WARNING2=If you choose to add this new key to the known hosts list and continue, then you will not receive this warning again.
DLG_DIFFERENTHOST_FINGERPRINT=The server's host key fingerprint is:
DLG_DIFFERENTHOST_REPLACE=&Replace the exist key with this new key

; dlg fwd edit
DLG_FWD_TITLE=SSH Port Forwarding
DLG_FWD_BANNER=Select direction for forwarded port:
DLG_FWD_LOCAL_PORT=Forward &local port
DLG_FWD_LOCAL_REMOTE=to remote &machine
DLG_FWD_LOCAL_REMOTE_PORT=&port
DLG_FWD_LOCAL_CHECKIDENTITY=A&ccept connections from other hosts
DLG_FWD_REMOTE_PORT=Forward &remote server port
DLG_FWD_REMOTE_LOCAL=to local m&achine
DLG_FWD_REMOTE_LOCAL_PORT=p&ort

MSG_SAME_SERVERPORT_ERROR=You cannot have two forwardings from the same server port (%d).
MSG_SAME_LOCALPORT_ERROR=You cannot have two forwardings from the same local port (%d).
MSG_UNSPECIFYIED_FWD_ERROR1=The following forwardings were not specified when this SSH session began:\n\n
MSG_UNSPECIFYIED_FWDS_ERROR1=The following forwarding was not specified when this SSH session began:\n\n
MSG_UNSPECIFYIED_FWD_ERROR2=\nDue to a limitation of the SSH protocol, these forwardings will not work in the current SSH session.\nIf you save these settings and start a new SSH session, the forwardings should work.
MSG_UNSPECIFYIED_FWDS_ERROR2=\nDue to a limitation of the SSH protocol, this forwarding will not work in the current SSH session.\nIf you save these settings and start a new SSH session, the forwarding should work.
MSG_INVALID_PORT_ERROR=Port "%s" is not a valid port number.\nEither choose a port name from the list, or enter a number between 1 and 65535.

; dlg fwd setup
DLG_FWDSETUP_TITLE=TTSSH: Forwarding Setup
DLG_FWDSETUP_LIST=&Port Forwarding
DLG_FWDSETUP_ADD=&Add...
DLG_FWDSETUP_EDIT=&Edit...
DLG_FWDSETUP_REMOVE=&Remove
DLG_FWDSETUP_CHECKIDENTITY=Local ports a&ccept connections from other hosts
DLD_FWDSETUP_X=X Forwarding
DLG_FWDSETUP_XAPP=Display remote &X applications on local X server

MSG_FWD_REMOTE_XSERVER=remote X server
MSG_FWD_REMOTE_XSCREEN=X server (screen %d)
MSG_FWD_REMOTE=Remote %s to local "%s" port %s
MSG_FWD_LOCAL=Local %s to remote "%s" port %s
MSG_FWD_X=Remote X applications to local X server

; dlg host
DLG_HOST_TITLE=Tera Term: New connection
DLG_HOST_TCPIPHOST=Hos&t:
DLG_HOST_TCPIPHISTORY=Hist&ory
DLG_HOST_TCPIPSERVICE=Service
DLG_HOST_TCPIPOTHER=Other
DLG_HOST_TCPIPPORT=TCP &port#:
DLG_HOST_TCPIPSSHVERSION=SSH &version:
DLG_HOST_TCPIPPROTOCOL=Proto&col:
DLG_HOST_SERIAL=S&erial
DLG_HOST_SERIALPORT=Po&rt:
DLG_HOST_HELP=&Help

MSG_TCPPORT_NAN_ERROR=The TCP port must be a number.

; dlg keygen
DLG_KEYGEN_TITLE=TTSSH: Key Generator
DLG_KEYGEN_KEYTYPE=Key type
DLG_KEYGEN_PASSPHRASE=Key passphrase:
DLG_KEYGEN_PASSPHRASE2=Confirm passphrase:
DLG_KEYGEN_SAVEPUBLIC=Save publi&c key
DLG_KEYGEN_SAVEPRIVATE=Save &private key
DLG_KEYGEN_GENERATE=&Generate

FILEDLG_SAVE_PUBLICKEY_TITLE=Save public key as:
FILEDLG_SAVE_PUBLICKEY_RSA1_FILTER=SSH1 RSA key(identity.pub)\0identity.pub\0All Files(*.*)\0*.*\0\0
FILEDLG_SAVE_PUBLICKEY_RSA_FILTER=SSH2 RSA key(id_rsa.pub)\0id_rsa.pub\0All Files(*.*)\0*.*\0\0
FILEDLG_SAVE_PUBLICKEY_DSA_FILTER=SSH2 DSA key(id_dsa.pub)\0id_dsa.pub\0All Files(*.*)\0*.*\0\0
MSG_SAVE_KEY_OPENFILE_ERROR=Can't open key file
MSG_SAVE_KEY_WRITEFILE_ERROR=Can't write key file
MSG_SAVE_PRIVATE_KEY_MISMATCH_ERROR=Two passphrases don't match.
MSG_SAVE_PRIVATEKEY_EMPTY_WARN=Are you sure that you want to use a empty passphrase?
FILEDLG_SAVE_PRIVATEKEY_TITLE=Save private key as:
FILEDLG_SAVE_PRIVATEKEY_RSA1_FILTER=SSH1 RSA key(identity)\0identity\0All Files(*.*)\0*.*\0\0
FILEDLG_SAVE_PRIVATEKEY_RSA_FILTER=SSH2 RSA key(id_rsa)\0id_rsa\0All Files(*.*)\0*.*\0\0
FILEDLG_SAVE_PRIVATEKEY_DSA_FILTER=SSH2 DSA key(id_dsa)\0id_dsa\0All Files(*.*)\0*.*\0\0

; dlg setup
DLG_SSHSETUP_TITLE=TTSSH: Setup
DLG_SSHSETUP_COMPRESS=&Compression level:
DLG_SSHSETUP_COMPRESS_NONE=None
DLG_SSHSETUP_COMPRESS_HIGHEST=Highest
DLG_SSHSETUP_CHIPER=&Preferred cipher order
DLG_SSHSETUP_CHIPER_UP=Move &Up
DLG_SSHSETUP_CHIPER_DOWN=Move &Down
DLG_SSHSETUP_CIPHER_BORDER=<ciphers below this line are disabled>
DLG_SSHSETUP_KNOWNHOST=SSH Known Hosts
DLG_SSHSETUP_KNOWNHOST_RW=Read/&write file:
DLG_SSHSETUP_KNOWNHOST_RO=&Read-only files:
DLG_SSHSETUP_HEARTBEAT=HeartBeat(keep-alive)
DLG_SSHSETUP_HEARTBEAT_UNIT=sec.(0 to turn off)
DLG_SSHSETUP_NOTICE=All options take effect the next time a session is started.

FILEDLG_OPEN_KNOWNHOSTS_RW_TITLE=Choose a read/write known-hosts file
FILEDLG_OPEN_KNOWNHOSTS_RO_TITLE=Choose a read-only known-hosts file to add

; dlg tis
DLG_TIS_TITLE=SSH Authentication Challenge
DLG_TIS_BANNER=Logging in to %s

; dlg unknown host
DLG_UNKNONWHOST_TITLE=SECURITY WARNING
DLG_UNKNOWNHOST_WARNINIG=There is no entry for the server "#####################################" in your list of known hosts. The machine you have contacted may be a hostile machine pretending to be the server.
DLG_UNKNOWNHOST_WARNINIG2=If you choose to add this machine to the known hosts list and continue, then you will not receive this warning again.
DLG_UNKNOWNHOST_FINGERPRINT=The server's host key fingerprint is:
DLG_UNKNOWNHOST_ADD=&Add this machine and its key to the known hosts list

; crypt.c
MSG_AES128_ENCRYPT_ERROR1=AES128 encrypt error(1): bytes %d (%d)
MSG_AES128_ENCRYPT_ERROR2=AES128 encrypt error(2)
MSG_AES128_DECRYPT_ERROR1=AES128 decrypt error(1): bytes %d (%d)
MSG_AES128_DECRYPT_ERROR2=AES128 decrypt error(2)
MSG_3DESCBC_ENCRYPT_ERROR1=3DES-CBC encrypt error(1): bytes %d (%d)
MSG_3DESCBC_ENCRYPT_ERROR2=3DES-CBC encrypt error(2)
MSG_3DESCBC_DECRYPT_ERROR1=3DES-CBC decrypt error(1): bytes %d (%d)
MSG_3DESCBC_DECRYPT_ERROR2=3DES-CBC decrypt error(2)
MSG_BLOWFISH_ENCRYPT_ERROR1=Blowfish encrypt error(1): bytes %d (%d)
MSG_BLOWFISH_ENCRYPT_ERROR2=Blowfish encrypt error(2)
MSG_BLOWFISH_DECRYPT_ERROR1=Blowfish decrypt error(1): bytes %d (%d)
MSG_BLOWFISH_DECRYPT_ERROR2=Blowfish decrypt error(2)
MSG_CIPHER_INIT_ERROR=Cipher initialize error(%d)
MSG_RSAKEY_SETUP_ERROR=Error setting up RSA keys
MSG_UNAVAILABLE_CIPHERS_ERROR=The server does not support any of the TTSSH encryption algorithms.\nA secure connection cannot be made in the TTSSH-to-server direction.\nThe connection will be closed.
MSG_CHIPHER_NONE_ERROR=All the encryption algorithms that this program and the server both understand have been disabled.\nTo communicate with this server, you will have to enable some more ciphers\nin the TTSSH Setup dialog box when you run Teraterm again.\nThis connection will now close.
MSG_RASKEY_TOOWEAK_ERROR=Server RSA keys are too weak. A secure connection cannot be established.
MSG_CHPHER_NOTSELECTED_ERROR=No cipher selected!

; fwd.c
MSG_FWD_LOCAL_CHANNEL_ERROR=The server attempted to manipulate a forwarding channel that does not exist.\nEither the server has a bug or is hostile. You should close this connection.
MSG_FWD_REQUEST_ERROR=Communications error while listening for a connection to forward.\nThe listening port will be terminated.
MSG_FWD_REFUSED_ERROR=Connection refused (perhaps the service is not currently running)
MSG_FWD_NETDOWN_ERROR=The machine could not be contacted (possibly a network problem)
MSG_FWD_MACHINEDOWN_ERROR=The machine could not be contacted (possibly the machine is down)
MSG_FWD_ADDRNOTFOUTD_ERROR=No address was found for the machine
MSG_FWD_CONNECT_ERROR=The forwarding connection could not be established
MSG_FWD_CHANNEL_ERROR=Communications error %s forwarded local %s.\n%s (code %d).\nThe forwarded connection will be closed.
MSG_FWD_CHANNEL_OPEN_X_ERROR=The server attempted to forward a connection through this machine.\nIt requested a connection to the X server on %s (screen %d).\n%s.\nThe forwarded connection will be closed.
MSG_FWD_CHANNEL_OPEN_ERROR=The server attempted to forward a connection through this machine.\nIt requested a connection to %s (port %s).\n%s.\nThe forwarded connection will be closed.
DLG_FWDMON_TITLE=TTSSH Port Forwarding Monitor
MSG_FWD_HOSTILE_ATTACK_ERROR=Host with IP number %s tried to connect to forwarded local port %d.\nThis could be some kind of hostile attack.
MSG_FWD_SOCKET_ERROR=Some socket(s) required for port forwarding could not be initialized.\nSome port forwarding services may not be available.\n(errno %d)
MSG_FWD_DUPLICATE_ERROR=TTSSH INTERNAL ERROR: Could not set port forwards because duplicate type/port requests were found
MSG_FWD_DENIED_HANDLE_ERROR=The server attempted to forward a connection through this machine.\nIt requested a connection to machine %s on port %s.\nAn error occurred while processing the request, and it has been denied.
MSG_FWD_DENIED_ERROR=The server attempted to forward a connection through this machine.\nIt requested a connection to machine %s on port %d.\nYou did not specify this forwarding to TTSSH in advance, and therefore the request was denied.
MSG_FWD_DENIED_X_ERROR=The server attempted to forward a connection through this machine.\nIt requested a connection to the local X server.\nYou did not specify this forwarding to TTSSH in advance, and therefore the request was denied.
MSG_FWD_DENIED_BY_SERVER_ERROR=A program on the local machine attempted to connect to a forwarded port.\nThe forwarding request was denied by the server. The connection has been closed.
MSG_FWD_COMM_ERROR=A communications error occurred while sending forwarded data to a local port.\nThe forwarded connection will be closed.

; hosts.c
MSG_HOSTS_READ_ENOENT_ERROR=An error occurred while trying to read a known_hosts file.\nThe specified filename does not exist.
MSG_HOSTS_READ_ERROR=An error occurred while trying to read a known_hosts file.
MSG_HOSTS_ALLOC_ERROR=Memory ran out while trying to allocate space to read a known_hosts file.
MSG_HOSTS_HOSTNAME_INVALID_ERROR=The host name contains an invalid character.\nThis session will be terminated.
MSG_HOSTS_HOSTNAME_EMPTY_ERROR=The host name should not be empty.\nThis session will be terminated.
MSG_HOSTS_FILE_UNSPECIFY_ERROR=The host and its key cannot be added, because no known-hosts file has been specified.\nRestart Teraterm and specify a read/write known-hosts file in the TTSSH Setup dialog box.
MSG_HOSTS_WRITE_EACCES_ERROR=An error occurred while trying to write the host key.\nYou do not have permission to write to the known-hosts file.
MSG_HOSTS_WRITE_ERROR=An error occurred while trying to write the host key.\nThe host key could not be written.

; keyfiles.c
MSG_KEYFILES_READ_ENOENT_ERROR=An error occurred while trying to read the key file.\nThe specified filename does not exist.
MSG_KEYFILES_READ_ERROR=An error occurred while trying to read the key file.
MSG_KEYFILES_READ_ALLOC_ERROR=Memory ran out while trying to allocate space to read the key file.
MSG_KEYFILES_PRIVATEKEY_NOTCONTAIN_ERROR=The specified key file does not contain an SSH private key.
MSG_KEYFILES_PRIVATEKEY_TRUNCATE_ERROR=The specified key file has been truncated and does not contain a valid private key.
MSG_KEYFILES_PRIVATEKEY_LENGTH_ERROR=The specified key file cannot be decrypted using the passphrase.\nThe file does not have the correct length.
MSG_KEYFILES_PRIVATEKEY_NOCIPHER_ERROR=The specified key file cannot be decrypted using the passphrase.\nThe cipher type used to encrypt the file is not supported by TTSSH for this purpose.
MSG_KEYFILES_PASSPHRASE_EMPTY_ERROR=The specified key file cannot be decrypted using the empty passphrase.\nFor auto-login, you must create a key file with no passphrase.\nBEWARE: This means the key can easily be stolen.
MSG_KEYFILES_PASSPHRASE_ERROR=The specified key file cannot be decrypted using the passphrase.\nThe passphrase is incorrect.
MSG_KEYFILES_CRYPTOLIB_ERROR=Error in crytography library.\nPerhaps the stored key is invalid.

; pkt.c
MSG_PKT_OVERSIZED_ERROR=Oversized packet received from server; connection will close.

; ssh.c
MSG_SSH_INVALID_COMPDATA_ERROR=Invalid compressed data in received packet
MSG_SSH_TRUNCATED_PKT_ERROR=Received truncated packet (%ld > %d) @ grab_payload()
MSG_SSH_TRUNCATED_PKT_LIM_ERROR=Received truncated packet (%ld > %d) @ grab_payload_limited()
MSG_SSH_COREINS_ERROR='CORE insertion attack' detected.  Aborting connection.
MSG_SSH_CORRUPTDATA_ERROR=Detected corrupted data; connection terminating.
MSG_SSH_DECOMPRESS_ERROR=Internal error: a packet was not fully decompressed.\nThis is a bug, please report it.
MSG_SSH_SEND_PKT_ERROR=A communications error occurred while sending an SSH packet.\nThe connection will close. (%s:%d)
MSG_SSH_COMP_ERROR=An error occurred while compressing packet data.\nThe connection will close.
MSG_SSH_UNABLE_FWD_ERROR=\nIt may have disconnected because it was unable to forward a port you requested to be forwarded from the server.\nThis often happens when someone is already forwarding that port from the server.
MSG_SSH_SERVER_DISCON_ERROR=Server disconnected with message '%s'.%s
MSG_SSH_SERVER_DISCON_NORES_ERROR=Server disconnected (no reason given).%s
MSG_SSH_VERSION_ERROR=This program does not understand the server's version of the protocol.
MSG_SSH_SEND_ID_ERROR=An error occurred while sending the SSH ID string.\nThe connection will close.
MSG_SSH_UNEXP_MSG2_ERROR=Unexpected SSH2 message(%d) on current stage(%d)
MSG_SSH_UNEXP_MSG_ERROR=Unexpected packet type received: %d
MSG_SSH_ALLOC_TERMINAL_ERROR=The server cannot allocate a pseudo-terminal. You may encounter some problems with the terminal.
MSG_SSH_SETUP_COMP_ERROR=An error occurred while setting up compression.\nThe connection will close.
MSG_SSH_DECRYPT_RSA_ERROR=An error occurred while decrypting the RSA challenge.\nPerhaps the key file is corrupted.
MSG_SSH_UNSUPPORT_AUTH_METHOD_ERROR=Internal error: unsupported authentication method
MSG_SSH_AUTH_FAILURE_ERROR=SSH2 autologin error: user authentication failed.
MSG_SSH_SERVER_UNSUPPORT_AUTH_METHOD_ERROR=\nAuthentication method is not supported by server.
MSG_SSH_CHANNEL_OPEN_ERROR=SSH2_MSG_CHANNEL_OPEN_FAILURE was received.\nchannel [%d]: reason: %s(%d) message: %s
MSG_SSH_NO_FREE_CHANNEL=Could not open new channel. TTSSH is already opening too many channels.

; ttxssh.c
MSG_UNKNOWN_OPTION_ERROR=Unrecognized command-line option: %s

; x11util.c
MSG_X_AUTH_ERROR=Remote X application sent incorrect authentication data.\nIts X session is being cancelled.

MSG_CREATEWINDOW_KEYGEN_ERROR=Unable to display Key Generator dialog box.
MSG_CREATEWINDOW_ABOUT_ERROR=Unable to display About dialog box.
MSG_CREATEWINDOW_SETUP_ERROR=Unable to display TTSSH Setup dialog box.
MSG_CREATEWINDOW_FWDSETUP_ERROR=Unable to display forwarding setup dialog box.
MSG_CREATEWINDOW_FWDEDIT_ERROR=Unable to display forwarding edit dialog box.
MSG_CREATEWINDOW_AUTH_ERROR=Unable to display authentication dialog box.\nConnection terminated.
MSG_CREATEWINDOW_AUTHSETUP_ERROR=Unable to display authentication setup dialog box.
MSG_OPEN_FILEDLG_KNOWNHOSTS_ERROR=Unable to display file dialog box: error %d

MSG_WARNING=WARNING
MSG_ERROR=ERROR
MSG_TTSSH_ERROR=TTSSH Error
MSG_NONFAITAL_ERROR=Tera Term: not fatal error

BTN_OK=OK
BTN_CANCEL=Cancel
BTN_DISCONNECT=&Disconnect
BTN_CONTINUE=&Continue


[TTProxy]
DLG_TAHOMA_FONT=Tahoma,8,0

NEMU_SETUP=&Proxy...
MENU_ABOUT=About TT&Proxy...

DLG_SETUP_TITLE=Proxy Setup
DLG_SETUP_URL=URL
DLG_SETUP_TYPE=&Type
DLG_SETUP_HOST=&Hostname
DLG_SETUP_PORT=Port &number
DLG_SETUP_USER=&Username
DLG_SETUP_PASS=&Password
DLG_SETUP_OTHER=&Other setup...

DLG_OTHER_TITLE=Other Setup
DLG_OTHER_COMMON=Common setup
DLG_OTHER_TIMEOUT=Connection &Timeout
DLG_OTHER_SECOND=seconds
DLG_OTHER_LOG=Proxy connection &log
DLG_OTHER_REFER=Re&fer...
DLG_OTHER_SOCKS=SOCKS proxy setup
DLG_OTHER_RESOLV=Name &Resolving
DLG_OTHER_RESOLV_AUTO=auto resolve
DLG_OTHER_RESOLV_REMOTE=resolve remote
DLG_OTHER_RESOLV_LOCAL=resolve local
DLG_OTHER_TELNET=TELNET Proxy setup
DLG_OTHER_HOST=&Hostname prompt
DLG_OTHER_USER=&Username prompt
DLG_OTHER_PASS=&Pasword prompt
DLG_OTHER_CONNECT=&Connected message
DLG_OTHER_ERROR=&Error message

DLG_ABOUT_TITLE=About TTProxy
DLG_ABOUT_EXTENTION=Teraterm proxy extension
DLG_ABOUT_YEBISUYA=YebisuyaHompo
DLG_ABOUT_HOMEPAGE=TTProxy home page

MSG_EMPTY_HOSTNAME=Hostname is empty!
MSG_ILLEGAL_PORT=Illegal port number!
MSG_EMPTY_PARAMETER=Some parameters are empty!
MSG_PROXY_UNAUTHORIZED=Proxy authorization failed!
MSG_PROXY_BAD_REQUEST=Proxy prevent this connection!
MSG_TYPE_NONE=Without Proxy
MSG_LOGFILE_SELECT=Select Logfile
MSG_UNABLE_TO_GET_ISSUER_CERT=Unable to get Issuer Certificate
MSG_UNABLE_TO_GET_CRL=Unable to get Ceritifcate CRL
MSG_UNABLE_TO_DECRYPT_CERT_SIGNATURE=Unable to decrypt Certificate's Signature
MSG_UNABLE_TO_DECRYPT_CRL_SIGNATURE=Unable to decrypt CRL's Signature
MSG_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY=Unable to decode Issuer Public Key
MSG_CERT_SIGNATURE_FAILURE=Certificate Signature failure
MSG_CRL_SIGNATURE_FAILURE=CRL Signature failure
MSG_CERT_NOT_YET_VALID=Certificate is not yet valid
MSG_CERT_HAS_EXPIRED=Certificate has expired
MSG_CRL_NOT_YET_VALID=CRL is not yet valid
MSG_CRL_HAS_EXPIRED=CRL has expired
MSG_ERROR_IN_CERT_NOT_BEFORE_FIELD=Format error in Certificate's notBefore field
MSG_ERROR_IN_CERT_NOT_AFTER_FIELD=Format error in Certificate's notAfter field
MSG_ERROR_IN_CRL_LAST_UPDATE_FIELD=Format error in CRL's lastUpdate field
MSG_ERROR_IN_CRL_NEXT_UPDATE_FIELD=Format error in CRL's nextUpdate field
MSG_OUT_OF_MEM=Out of memory
MSG_DEPTH_ZERO_SELF_SIGNED_CERT=Self-signed Certificate
MSG_SELF_SIGNED_CERT_IN_CHAIN=Self-signed Certificate found in Certificate chain
MSG_UNABLE_TO_GET_ISSUER_CERT_LOCALLY=Unable to get Local Issuer Certificate
MSG_UNABLE_TO_VERIFY_LEAF_SIGNATURE=Unable to verify the first Certificate
MSG_CERT_CHAIN_TOO_LONG=Certificate chain too long
MSG_CERT_REVOKED=Certificate revoked
MSG_INVALID_CA=Invalid CA Certificate
MSG_PATH_LENGTH_EXCEEDED=Path length constraint exceeded
MSG_INVALID_PURPOSE=Unsupported Certificate purpose
MSG_CERT_UNTRUSTED=Certificate not trusted
MSG_CERT_REJECTED=Certificate rejected
MSG_SUBJECT_ISSUER_MISMATCH=Subject Issuer mismatch
MSG_AKID_SKID_MISMATCH=Authority and Subject Key Identifier mismatch
MSG_AKID_ISSUER_SERIAL_MISMATCH=Authority and Issuer Serial Number mismatch
MSG_KEYUSAGE_NO_CERTSIGN=Key usage does not include Ceritifcate signing
MSG_APPLICATION_VERIFICATION=Application verification failure
MSG_UNMATCH_COMMON_NAME=Umatch Common Name
MSG_UNABLE_TO_GET_COMMON_NAME=Unable to get Common Name

BTN_OK=OK
BTN_CANCEL=Cancel


[TTMenu]
DLG_TAHOMA_FONT=Tahoma,8,0

MENU_LISTCONFIG=List Configuration
MENU_SETTING=Setting
MENU_ICON=showing large icon
MENU_FONT=specifying font
MENU_LEFTPOPUP=showing list by left-click
MENU_HOTKEY=showing list hotkey(Ctl+Alt+M)
MENU_VERSION=Version
MENU_EXEC=Execute
MENU_CLOSE=Quit
MENU_NOTRAY=(none)

DLG_ABOUT_TITLE=Version Information
DLG_ABOUT_APPNAME=launch tool

DLG_CONFIG_TITLE=List Cofiguration
DLG_CONFIG_ITEM=List Item
DLG_CONFIG_CONFIG=Configuration
DLG_CONFIG_NAME=Name
DLG_CONFIG_PATTERN=Launch Pattern
DLG_CONFIG_AUTO=autologin
DLG_CONFIG_HOST=Host Name
DLG_CONFIG_USER=User Name
DLG_CONFIG_PASS=Password
DLG_CONFIG_MACRO=specified macro file
DLG_CONFIG_LAUNCH=launch only
DLG_CONFIG_STARTUP=kick at starting
DLG_CONFIG_SSH=use SSH
DLG_CONFIG_KEYFILE=Keyfile
DLG_CONFIG_CHALLENGE=use Challenge
DLG_CONFIG_DETAIL=details

DLG_ETC_TITLE=Configuration Details
DLG_ETC_APP=Application
DLG_ETC_OPTION=Option
DLG_ETC_CONFIG=TeraTerm Configuration File(except launching)
DLG_ETC_AUTO=Configuration for autologin
DLG_ETC_LOGFILE=log file
DLG_ETC_PROMPT=Prompt
DLG_ETC_USER=User Name
DLG_ETC_PASS=Password

MSG_ERROR_READREG=Couldn't read the registory data.\n
MSG_ERROR_MAKETTL=Could not make 'ttpmenu.TTL'\n
MSG_ERROR_LAUNCH=Launching the application was failure.\n
MSG_ERROR_NOREGNAME=error: no registry name
MSG_ERROR_INVALIDREGNAME=can't use "\\" in registry name
MSG_ERROR_NOHOST=error: no host name
MSG_ERROR_NOMACRO=error: no macro filename
MSG_ERROR_CHECKFILE=checking [%s] file was failure.\n
MSG_ERROR_SAVEREG=error: couldn't save to registory.\n
MSG_ERROR_OPENREG=error: couldn't open registory.\n
MSG_ERROR_SELECTREG=Select deleted registry name
MSG_ERROR_GETDELETEREG=Couldn't get the deleting entry
MSG_ERROR_DELETEREG=Couldn't delete the registory.\n
MSG_ERROR_WINCLASS=Couldn't register the window class.\n

FILEDLG_MACRO_TITLE=specifying macro file
FILEDLG_MACRO_FILTER=macro file(*.ttl)\0*.ttl\0all files(*.*)\0*.*\0\0
FILEDLG_KEY_TITLE=specifying private key file
FILEDLG_KEY_FILTER=identity files\0identity;id_rsa;id_dsa\0identity(RSA1)\0identity\0id_rsa(SSH2)\0id_rsa\0id_dsa(SSH2)\0id_dsa\0all(*.*)\0*.*\0\0
FILEDLG_TERATERM_TITLE=specifying TeraTerm
FILEDLG_TERATERM_FILTER=execute file(*.exe)\0*.exe\0all files(*.*)\0*.*\0\0
FILEDLG_INI_TITLE=specifying config file
FILEDLG_INI_FILTER=config file(*.ini)\0*.ini\0all files(*.*)\0*.*\0\0
FILEDLG_LOG_TITLE=specifying log file
FILEDLG_LOG_FILTER=log file(*.log)\0*.log\0all files(*.*)\0*.*\0\0

BTN_OK=OK
BTN_CANCEL=Cancel
BTN_DEFAULT=Default


[TTXKanjiMenu]
MENU_KANJI=&KanjiCode
MENU_RECV_SJIS=Recv: &Shift_JIS
MENU_RECV_EUCJP=Recv: &EUC-JP
MENU_RECV_JIS=Recv: &JIS
MENU_RECV_UTF8=Recv: &UTF-8
MENU_RECV_UTF8m=Recv: UTF-8&m
MENU_SEND_SJIS=Send: S&hift_JIS
MENU_SEND_EUCJP=Send: EU&C-JP
MENU_SEND_JIS=Send: J&IS
MENU_SEND_UTF8=Send: U&TF-8